H10/T10 - 10mm rebar

Specifications

The Bar reinforcement in composite slabs usually takes the form of a relatively light welded fabric mesh, commonly supplemented by some bar reinforcement.

Bar reinforcement may be used to supplement the fabric mesh for various reasons such as:

  • To achieve longer fire resistance periods
  • To reinforce the slab around significant openings.
  • When additional transverse reinforcement is needed.
  • To achieve greater crack control.

Our high yield 10mm reinforcing steel bar is 100% UK sourced and manufactured to BS4449/2005 with CARES approval.

BS4483 fabricMesh Size NormalDiameter of WireCross Section AreaNormal Mass
BRC Ref:Pitch of Wires Per Metre widthPer m2
MainCrossMainCrossMainCross 
mmmmmmmmmm2mm2kg
Square Mesh
A39320020010103933936.16
A252200200882522523.95
A193200200771931933.02
A142200200661421422.22
BRC Ref: BS4483 fabric
Square MeshA393Mesh Size Normal - Pitch of Wires200200Diameter of Wire1010Cross Section Area - Per Metre width393393Normal Mass - Per m26.16
Square MeshA252Mesh Size Normal - Pitch of Wires200200Diameter of Wire88Cross Section Area - Per Metre width252252Normal Mass - Per m23.95
Square MeshA193Mesh Size Normal - Pitch of Wires200200Diameter of Wire77Cross Section Area - Per Metre width193193Normal Mass - Per m23.02
Square MeshA142Mesh Size Normal - Pitch of Wires200200Diameter of Wire66Cross Section Area - Per Metre width142142Normal Mass - Per m22.22

Contact us

We are here to help if you need support. Whether it's choosing the right product for you, checking measurements or anything else.

Feel free to Contact us or call our friendly and knowledgable team on 01335 347629